RELM PM4500 Manuel d'instructions télécharger pdf (Page 3)

This manual contains instructions for using the PM4500

Programmer (simply referred to as the Programmer) to

program the Mini-Corn@ Plus 16 and 99 Channel SM

Series Transceivers.

The Programmer has a non-volatile memory that requires

no battery to maintain data.

The Programmer is used for:

1. Assigning to the Transceiver the following Options

or Configuration Parameters:

n Transmit Time-Out Timer

n Scan Delay

n Priority Delay

n Key Pad Beep

n Channel 1 Beep

n Off Hook to Prioriiy Channel

n Off Hook Scan

n Power Up on Channel 1

n TX Carrier Delay

n Message Annunciator

n Talk Around

Range

2. Assigning to each channel the following parameters:

Receive Frequency

n Busy Channel Lockout (BCL)

RX’ Tone, DCS’ Code or External Decoder

n Transmit Frequency

TX’ Tone, DCS’ Code or External Encoder

3. Cloning:

Transferring data

from

the Transceiver to the

Programmer (ReadOperation)

n Transferring data from the Programmer

the

Transceiver (Write Operation)

‘DCS stands for Digital Coded Squelch

RX stands for Receive: TX stands for Transmit

The Programmer contains a keyboard (see Figure

below) with 20 keys arranged in a 4 x 5 matrix. A 6-

character LCD* display lights up when power is

applied.

All Programming and Cloning information is indicated

on the Programmer’s LCD display.

The Unit operates on 12VDC power from the Trans-

ceiver. Data between the Programmer and the Trans-

ceiver is transferred through a modular plug connected

to the Microphone jack on the Transceiver.

*LCD stands for Liquid Crystal Display

CHANNEL

OPTIONS 4

SIMPLEX

CLONE

ESCAPE TOGGLE

urn

CHANNEL A

DELETE

ENTER

KEYBOARD

1 2 3 4 5 6 7 8 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

RELM PM4500 Manuel d'instructions Page 3

Commentaires sur ces manuels